Power Switch / Reset Switch / Hard Disk Drive Led Connectors - Antec Mini Skeleton-90 User Manual

3.3
P S
OWER WITCH
Connected to the front of the Mini Skeleton-90 case Frame
are LED and switch leads for power, reset, and HDD LED
activity. Attach these to the corresponding connectors on
your motherboard. Consult your motherboard manual for
specific pin positions. For LEDs, colored wires are positive
(+). White or black wires are negative (–). If the LED does not
light up when the system is powered on, try reversing the
connection. For more info on connecting LEDs to your
motherboard, see your motherboard user's manual.
Note: There is no Power LED in this case. The illuminated case fans will turn on when there is
power to the computer.
All manuals and user guides at all-guides.com
/ R S / H
ESET WITCH ARD
D D LED C
ISK RIVE ONNECTORS
9