Preparing The Device For Transport; Ordering Replacement Parts; Cleaning, Maintenance And Ordering Of Spare Parts; Troubleshooting Guide - Hyundai HST4020 Instructions Manual

9.4 Preparing the device for transport

a) Drain the petrol tank using a petrol extraction pump.
b) Always let the engine run until it has used up the remainder of petrol in the tank.
c) Empty the engine oil from the warm engine.
d) Remove the spark plug boot from the spark plug.
e) Clean the cooling fins of the cylinder and the housing.
f) Remove the push bars if necessary. Ensure that the cables are not kinked.

9.5 Ordering replacement parts

Please quote the following data when ordering replacement parts:
a) Type of machine
b) Article number of the machine
c) Identification number of the machine
d) Replacement part number of the part required For our latest prices and information please go
to www.ducar.cn

Cleaning, maintenance and ordering of spare parts

10.
The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to the raw material system. The unit and its accessories
are made of various types of material, such as metal and plastic. De‐ fective components must be
disposed of as spe‐ cial waste. Ask your dealer or your local council.

Troubleshooting guide

11.
Fault Possible causes
The motor does Engine brake lever not
not start pressed
Spark plug defective
Engine does not Air filter dirty
run smoothly Spark plug worn
Choke open
‐
The equipment
does not
operate
smoothly and
‐
Motor is running,
roller
0083
Blades imbalanced
V‐ belt torn
Remedy
Press the engine brake lever
Replace spark plug
Top up fuel
Clean the air filter
Clean/Replace the spark plug
Set choke lever to "Run" position
‐ Have the blades replaced by a cus‐ tomer
service workshop.
‐ Have the V‐ belt replaced by a cus‐ tomer
service workshop.
12