Advertisement
Operation Instruction
Document No. : Silverbell FA Dismantling SOP
Operation Item :
Dismantle C/D cover
:
Attention︰If abnormal condition happens, please contact foreman or assistant immediately
Jig list(Jig specification)
Sucking Disc
Steps：
1. Open the notebook in angle of over
60°，put it upright on the desk..
Dismantle the parts which is on the
upper right of D cover. Dismantling
method is as shown in the picture.
4. Separate D cover from C cover with
a gap, then put a sucking disc on
the lower right of D cover.
5. Left hand holds TOP cover, and right
hand pulls the sucking disc to take
down the D cover as shown in the
picture.
6. At last, close the notebook and put it
flat, disassemble the side parts of D
cover from right to left in sequence,
and then take the whole D cover
with some strength.
7. During the dismantling, need protect
the surface of C/D cover and do not
make hard materials press on the
edge.
Jig list(Jig specification)
QTY
1
Tabulation： Zhu.Ya
Work Station:
2019/9/18
1.00
Ver. :
Date
Department：
3(1/1)
.
QTY
IE
Advertisement
