1. Manuals
  2. Brands
  3. Bartscher Manuals
  4. Kitchen Appliances
  5. PRO 300-G
  6. Instruction manual

Bartscher PRO 300-G Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PRO 300-G
174302
Original-Gebrauchsanleitung
V1/0818

Advertisement

Table of Contents
loading

Related Manuals for Bartscher PRO 300-G

Summary of Contents for Bartscher PRO 300-G

  • Page 1 PRO 300-G 174302 Original-Gebrauchsanleitung V1/0818...

  • Page 2: Table Of Contents

    GB/UK ENGLISH Table of contents 1.Safety ........................30 1.1 Key to symbols ..................... 30 1.2 Safety instructions ....................31 1.3 Proper use ......................34 2. General information ....................35 2.1 Liability and Warrantees ..................35 2.2 Copyright protection ..................... 35 2.3 Declaration of conformity ..................

  • Page 3: Safety

    Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.

  • Page 4: Safety Instructions

    CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation. 1.2 Safety instructions  The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or...
  • Page 5  Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself.  Do not use any accessory or spare parts that have not been recommended by the manufacturer.
  • Page 6  The supply cable must be disconnected from the socket only by pulling the plug.  Never carry or lift the device by the supply cable.  In any case do not open the device housing. In case of electrical or mechanical modifications the electric shock hazard will occur.

  • Page 7: Proper Use

    1.3 Proper use CAUTION! The device has been designed and built for commercial use and should be operated only by qualified personnel in kitchen facilities. The operational safety of the device is assured only in case of proper use, according to the operation manual.

  • Page 8: General Information

    2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.

  • Page 9: Transport, Packaging And Storage

    3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.

  • Page 10: Technical Data

    4. Technical data 4.1 Technical specification Description Slicer PRO 300-G 174302 Code-No.: Material: aluminium  Oblique cutter / gravity slice  Motorised machine  Designed for: Cheese, cold meats  Carriage; - Chrome-plated - 2 handles - Detachable  Pusher handle Model: ...

  • Page 11: Overview Of Parts

    4.2 Overview of parts Fig. 1 Fig. 2 Fig. 3 - 38 -...
  • Page 12 Description of drawings 1 - 3 on page 38 Blade ON-/OFF switch Blade protection Feet (4) Blade protective ring Slice tray Pusher handle with pusher Movable cut thickness wall Pusher grip Pusher handle protective guard Tray Sharpener Base unit Sharpener retaining screw Carriage Blade protection retaining screw Carriage locking knob...

  • Page 13: Device Protection Systems

    4.3 Device protection systems Mechanical protection: In terms of mechanical protection the slicer meets the requirements of the Machinery Directive CEE 2006/42. The following protective systems have been applied: Blade protective ring Sharpener Movable slice thickness wall Pusher handle with pusher Pusher grip Pusher handle hand guard Fig.
  • Page 14 Electrical protection: In terms of electrical protection the slicer meets the requirements of the following regulations: Low voltage directive CEE 2006/95; Electromagnetic compatibility directive 2004/108. ON-/OFF switch After the power cut the device can be switched on only by pressing the white button “ON“...

  • Page 15: Installation And Operation

    5. Installation and operation 5.1 Installation 5.1.1 Unpacking The device unpacking should be carried out by at least 3 people if the device is to be lifted manually. Otherwise, the device can be transported to the place of installation using a fork lift. Unpack the device in the following order.

  • Page 16: Location

    5.1.2 Location  Place the device in the required place.  Place the device on an even, dry and stable surface.  When selecting the place take into consideration the dimensions of the device (Section 4.1 “Technical specification“). Provide enough space to securely operate the device.

  • Page 17: Connection

    5.1.3 Connection DANGER! Electric shock hazard! The device can cause injuries due to improper installation! Before installation and connecting the local power grid specification should be compared with that of the device (see rating plate). Connect the device only in case of compliance! ...
  • Page 18  Make sure that the tray is securely attached and then proceed in the following way to check if the device operates: - Press the white switch button ”ON“ (I) and then the black switch button STOP “OFF“ (O) (fig. 17); - When the device is on, check if the device starts automatically when it has been unplugged and plugged again.

  • Page 19: Loading And Cutting

    - Make sure that the sharpener is properly attached and can be easily removed (d, fig. 21). Fig. 21 5.2.2 Loading and cutting CAUTION! Before loading the slicer the slice thickness adjustment need to be set at “0” and the device must be switched off. Assume the proper position to preclude direct contact with the blade.
  • Page 20 CAUTION Never take the position when the hands, fingers or other parts of the body may come into contact with the blade! (Fig. 23). 5. Turn the device on by pressing the white START button of the device switch (13). The ON/OFF control light comes on.

  • Page 21: Blade Sharpening

    5.2.3 Blade sharpening CAUTION! During blade sharpening pay attention to RESIDUAL RISKS (section 4.3. “Device protection systems” / Residual risks) in relation to risks of cut injuries that may occur when the operation instructions for the device included in this instruction manual are not met. During blade sharpening the following steps have to be taken: 1.
  • Page 22 8. Hold the buttons 2 and 3 simultaneously depressed for 3-4 seconds and activate both at the same time. (fig. 28). Note: The burr removals should not take longer than 3-4 seconds to avoid the cutting edge deformation. 9. Turn off the device with the button STOP “OFF“ (O) of the switch of the device (13) and check that the blade is satisfactorily sharp.

  • Page 23: Cleaning And Maintenance

    6. Cleaning and maintenance 6.1 Important tips WARNING! Before any maintenance works or cleaning disconnect the device from the power supply (unplug!). Never use pressurized water for cleaning the device. Protect the device from the water penetration. CAUTION Do not use any tools, brushes or similar objects for cleaning that may damage the surface.

  • Page 24: Cleaning

    6.2 Cleaning 6.2.1 Cleaning of the carriage and pusher handle o To clean, remove the carriage (8) from the device. o The carriage (8) may be dismounted, for example for cleaning, only when the slice thickness adjustment (11) is set back to “0”...
  • Page 25 o To clean the back side of the blade (1) and the blade protective ring (3) proceed in the following way: - Remove the blade protection (2) (fig. 30); - Remove the sharpener from the device (a, fig. 32); - Open the movable slice thickness wall (16) using the slice thickness adjustment (11) in order to place the tool for blade replacement on...

  • Page 26: Cleaning Of Cold Meats Guide And Slice Tray

    6.2.3 Cleaning of cold meats guide and slice tray o To remove the cold meats guide, pull it upwards with the handle (1, fig. 33) until it is released from two pins (2, fig. 33). o Clean the cold meats guide with lukewarm water and neutral cleaning agent.

  • Page 27: Maintenance

    6.3 Maintenance CAUTION! All maintenance and repair works for the device must be performed by qualified personnel only. o Grease the carriage guide regularly with the oil for precision machinery. Open the “OIL” indicated cover (fog. 36) next to the slice thickness adjustment and insert a few drops of the oil into the opening behind the cover.

  • Page 28: Possible Malfunctions

    7. Possible Malfunctions In case of malfunction, disconnect the device from its power source. Before contacting the service or sales agent, verify - based on the table below - whether it is possible to eliminate disruption in operation. Problem Cause Solution ...

  • Page 29: Waste Disposal

    Electric devices should be used and disposed of properly to prevent the impact on the environment.  Disconnect the device from the power supply and remove the power cord from the device. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120...

Table of Contents