Ssetting Up The Control Unit - Nakanishi Emax Evoluion Operation Manual

SSetting Up the Control Unit

1.Connecting the Motor/Attachment
Insert the motor cord plug into the Motor A Connector o or the
Motor B Connector !4 , and align the pin on the plug with the
groove on the connector and tighten the motor cord plug nut.
(Fig. 3)
2.Connecting the Optional Foot Pedal
Insert the foot pedal cord plug into the Foot Pedal Connector @1
and align the pin on the plug with the groove on the connector.
(Fig. 4)
3.Connecting the Power Cord
Insert the Power Cord @2 plug into the Power Connector
Assembly @3 on the back of the control unit securely and
carefully align the pins. (Fig. 5)
12
7
9
21
23
14
Fig. 3
Fig. 4
22
Fig. 5
4