Table Of Contents - Nakanishi Emax Evoluion Operation Manual

Contents
S Cautions for handling and operation ... P.1
S Component Names ......................... P.3
S Setting Up the Control Unit ............ P.4
S Operating Procedures .................... P.5
S Memory-Speed Function, FIXPEED .... P.6
S Load Monitor LED ........................... P.6
S Motor Protection Circuit ................ P.6
S Turn-On-Memory Function ........... P.6
S Error Codes ..................................... P.7
Thank you for purchasing Emax Evolution. This is a high-precision, extremely high speed micromotor
rotary hand tool system. This system is designed for high-precision, small diameter deburring,
grinding and a wide variety of other applications.
Keep this Operation Manual near Emax Evolution system for any operators to refer to whenever
operating this system.
Please read this Operation Manual carefully prior to use.
Cautions for handling and operation
Read these cautions carefully and only use in the manner intended.
Safety instructions are intended to avoid potential hazards that could result in personal
injury or damage to the device. Safety instructions are classified as follows in accordance
with the seriousness of the risk.
Class
WARNING
CAUTION
NOTICE
A. GROUNDING INSTRUCTIONS
q
In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to
reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
w
Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician.
e
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor
with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding
conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-
grounding conductor to a live terminal.
r
Check with a qualified electrician or service personnel if the grounding instructions are not completely understood,
or if in doubt as to whether the tool is properly grounded.
t
Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool's plug.
1
A hazard that could result in bodily injury or damage to the device if the safety
instructions are not followed.
A hazard that could result in light or moderate bodily injury or damage to the device if
the safety instructions are not followed.
General information needed to operate the device safely.
S Fuse Replacement ......................... P.7
S Maintenance Mode ........................ P.8
S Motor and Attachment Operation ...... P.9
S Handpiece Stand .......................... P.11
S Handpiece Holder ........................ P.11
S Specifications ............................... P.12
S European EC Directive Conformation .... P.12
S Troubleshooting ........................... P.13
S Optional Motors and Handpieces ..... P.14
Degree of Risk