SHandpiece Stand
On the bottom of the Handpiece stand, the tools necessary for
attachment maintenance and a spare chuck (optional) can be
mounted. (Fig. 16)
SHandpiece Holder
Insert the handpiece holder into the hole at the each side with the
control unit, and fix it with the provided screw to fit the usable
angle. (Fig.17)
The attachment example of handpiece holder shows Fig. 18, Fig. 19,
Fig. 20.
If the holder is attached as Fig. 20, be sure to insert only the standard
motor ENK-410S.
And there is the case the holder can't be used all for the attachments.
11
Fig. 18
Fig. 19
Fig. 16
Fig. 17
Fig. 20