Advertisement
Quick Links
RFA Footsies
Installation Manual
Included
Drive side RFA Footsie
Non-drive side RFA Footsie
4 M8 bolts
4 M6 bolts
4 Rubber pads (using them is optional)
Tools needed
6mm allen key
4mm allen key
Note: Utility Rack must be installed on the frame before attaching RFA Footsies.
Installing RFA Footsies
1
Loosen the four bolts that attach the Utility Rack to the
RFA frame prior to starting.
3
Remove the upper clamp assembly from drive side
RFA Footsie.
2
RFA Footsies are directional. Choose the drive side RFA
Footsie first. The mounting plate faces the front of the bike.
4
Align bolt positions on RFA Footsie with threaded holes
on RFA frame. Route the derailleur cables behind the
RFA Footsie front mounting plate. Do not pinch cables.
Loosely thread the front two M8 bolts.
Advertisement
Related Manuals for Xtracycle RFA Footsies
Summary of Contents for Xtracycle RFA Footsies
-
Page 1: Installation Manual
Tools needed 6mm allen key 4mm allen key Note: Utility Rack must be installed on the frame before attaching RFA Footsies. Installing RFA Footsies Loosen the four bolts that attach the Utility Rack to the RFA Footsies are directional. Choose the drive side RFA RFA frame prior to starting. - Page 2 RFA Footsies Installation Manual, Continued (Optional): Wrap a rubber pad around the Utility Place upper clamp assembly on the Utility Rack and Rack at the point where the clamp assembly attaches. loosely thread the M8 bolts. You will need to temporarily remove one of the front M8 bolts.