Download Print this page

Advertisement

Quick Links

Warranty
Xtracycle KickBack 3 Kickstands are guaranteed to be free from manufacturing defects for
one (1) year from the original date of purchase.
Defective products will be repaired or replaced at Xtracycle's discretion. To determine if a warranty
claim is valid you may be required to return the product to Xtracycle for inspection. Xtracycle is not
responsible for removal, installation or shipping costs. This warranty applies only to the original buyer
and is not transferable.
This warranty does not cover damage from use of this product outside of its intended range or that
resulting from modification or neglect. It also does not cover wear and tear resulting from the normal
use of the product.
Double your warranty to two years!
Register your Xtracycle KickBack 3 within 14 days
of purchase to extend your warranty to two years.
http://www.xtracycle.com/register
D i g i t a l M a n u a l :
h t t p : / / X C Y. C L / k b 3 i n s t a l l
Our mission:
To empower people with
transformational tools that
move the body and spirit.
www.xtracycle.com
A rock steady, dual sided kickstand designed for
strength, safety and easy Xtracycle compatibility.
REV3
K i c k B a c k 3 M a n u a l
A
B
C
H
D
F
E
G
What's Included:
A: One KickBack 3 (Uncut Legs)
B: Two Xtracycle BridgeBolts
C: Four Nuts and Round Washers
D: One 28mm x 35mm Rectangular Washer
E: Two M5x20mm Bolts
F: Two Plastic End Plugs
G: Two 7/8 Inch Rubber Feet
H: One BoomStrap
Recommended Tools:
10mm Socket Wrench
5mm Allen Wrench
Pipe Cutter or Hacksaw/Cutting Guide
www.xtracycle.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the KickBack 3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Xtracycle KickBack 3

  • Page 1 K i c k B a c k 3 M a n u a l claim is valid you may be required to return the product to Xtracycle for inspection. Xtracycle is not responsible for removal, installation or shipping costs. This warranty applies only to the original buyer and is not transferable.
  • Page 2 STEP 3: Hold the Stand in Place Tighten Things Down Step 3a: Moving the legs If your Xtracycle has a threaded as necessary, lightly snug all boss on the underside of the four nuts with a 10mm socket boom tube (A), just ahead of wrench.
  • Page 3 STEP 5 Cont’d: Measure the KickBack 3 If you’re installing on another Xtracycle or want to fine Note: If you are fitting the KickBack to an EdgeRunner and want to use the tune things, measure up the distance you calculated default kickstand height, you can skip to step 5.