Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Xtracycle RFA Kickback
Summary of Contents for Xtracycle RFA Kickback
- Page 1 Manual 2021...
- Page 2 Please note: The RFA KickBack is only compatible with the RFA in Utility mode. Tools needed Hardware included M6 Allen wrench with ball end (8) M8 washers (4) M8 X 25 mm bolts 01 A 01 B Bring the KickBack up and under the RFA.
- Page 3 01 C 01 D Place two washers on one of the M8 bolts. Starting on the The reason for starting this off with just your fingers is to inside of the mounting plate and using just your fingers, insure that you do not cross thread the bolt since you may be thread the bolt with the washers to the front boss until you coming at it from a not ideal angle.
- Page 4 01 G 01 H Using the ball end of the Allen wrench, tighten the two rear Using the shorter end of the Allen wrench, tightly secure all bolts. bolts in place. 01 I Your RFA KickBack installation is now complete.
- Page 5 Engaging the RFA KickBack Disengaging the RFA KickBack With one hand on the handlebars and another on the Hooptie With one hand on the handlebars and another on the / SnackBar bracket or rear deck, use your foot to pull the Hooptie / SnackBar bracket or rear deck, place your foot on KickBack legs down.
Need help?
Do you have a question about the RFA Kickback and is the answer not in the manual?
Questions and answers