Table of Contents
Advertisement
Install DSM on Synology NAS
After hardware setup is completed, please install DiskStation Manager (DSM) – Synology's browser-based
operating system – on your DS1821+.
Install DSM with Web Assistant
Your DS1821+ comes with a built-in tool called
from the Internet and install it on your DS1821+. To use Web Assistant, please follow the steps below.
1 Power on your DS1821+.
2 Open a web browser on a computer connected to the same network as the DS1821+.
3 Enter either of the following into the address bar of your browser:
a
find.synology.com
b
synologynas:5000
4 Web Assistant will be launched in your web browser. It will search for and find the Synology NAS within the
local network. The status of the DS1821+ should be
5 Click
Connect
to start the setup process and follow the onscreen instructions.
Note:
• The Synology NAS must be connected to the Internet to install DSM with Web Assistant.
• Recommended browsers: Chrome, Firefox.
• Both the Synology NAS and the computer must be in the same local network.
6 If you accidentally leave the installation process before it is finished, sign into DSM as admin (default
administrative account name) with the password left blank.
Learn More
Your DS1821+ is now ready for action. For more information or online resources about your DS1821+, please
visit
Synology's official
21
Web Assistant
DS1821+
website, which contains
step-by-step tutorials and frequently asked
that helps you download the latest version of DSM
Not
Installed.
4
Chapter
questions.
Hide quick links:
Advertisement
Table of Contents
