Table of Contents
Advertisement
Install DSM on Synology NAS
After hardware setup is finished, please install DiskStation Manager (DSM) – Synology's browser-based
operating system – on your Synology NAS.
Install DSM with Web Assistant
Your Synology NAS comes with a built-in tool called
DSM from the Internet and install it on your Synology NAS. To use Web Assistant, please follow the steps below.
1 Power on the Synology NAS.
2 Open a web browser on a computer connected to the same network as the Synology NAS.
3 Enter either of the following into the address bar of your browser:
a
find.synology.com
b
synologynas:5000
4 Web Assistant will be launched in your web browser. It will search for and find the Synology NAS within the
local network. The status of the Synology NAS should be
5 Click
Connect
to start the setup process and follow the onscreen instructions.
Note:
1. The Synology NAS must be connected to the Internet to install DSM with Web Assistant.
2. Suggested browsers: Chrome, Firefox.
3. Both the Synology NAS and the computer must be in the same local network.
6 If you accidentally leave the installation process before it is finished, log in to the DSM as admin (default
administrative account name) with the password left blank.
Learn More
Congratulations! Your Synology NAS is now ready for action. For more information or online resources about your
Synology NAS, please visit www.synology.com.
16
Web Assistant
that helps you download the latest version of
Not
installed.
DS3617xsll
3
Chapter
Advertisement
Table of Contents
