Installation - Chevrolet Chevelle 1967 Overhaul Manual

SOLENOID 6Y-6
STARTING SOLENOID
INDEX
Page
Removal 6Y-6
Installation 6Y-6
REMOVAL
1. Remove starting motor as previously described.
2. Remove the outer screw and washer from the motor
connector strap terminal.
3. Remove the two screws retaining solenoid housing to
end frame assembly.
4. Twist solenoid clockwise to remove flange key from
keyway slot in housing; t h e n remove solenoid
assembly.
INSTALLATION
1. With solenoid return spring installed on plunger,
position solenoid body to drive housing and turn
counterclockwise to engage the flange key in the
keyway slot.
2. Install two screws retaining solenoid housing to end
frame.
SOLENOID
BODY TO HOLD-IN
\ /*&, COIL CONTACT
RING
CONTACT
FINGER
TO PULL-IN
COIL
MOTOR CONNECTOR
STRAP TERMINAL
END _J
COVER
Fig. 11s—Exploded View of Solenoid
3. Install outer screw and washer securing motor con-
nector strap terminal.
4. Install starter motor as previously described.
CHEVROLET. CHASSIS OVERHAUL MANUAL