Pump Assembly - Chevrolet Chevelle 1967 Overhaul Manual

CLUTCH AND TRANSMISSIONS 7-84
FORWARD
CLUTCH PISTON' ..
Fig. 76T-lnstalling Forward Clutch Piston
6. Compress springs in arbor press, using clutch com-
pressor Tools J-4670 and J-21664, install snap ring
7. If removed, install turbine shaft in forward clutch
housing, using arbor press.
8. Install forward clutch hub washers on forward clutch
hub. Retain with petrolatum.
9. Place forward clutch hub into forward clutch housing
10. Oil and install five (5) radial grooved composition
and four (4) flat steel and one (1) waved steel clutch
plate (plate with notches) starting with waved steel
and alternating steel and composition (fig 77T)
t a
J
i r e C t C M c h h u b a n d retai n i n g
gJ
12. Place forward clutch housing on pump delivery
sleeve and air check clutch operation (fig. 79T).
COMPOSITION
PLATES
FORWARD
CLUTCH
HOUSING
FORWARD CLUTCH HOUSING
DIRECT CLUTCH HUB -
Fig. 78T-lnstalling Forward Clutch Housing
to Direct Clutch Hub Snap Ring
DIRECT CLUTCH AND INTERMEDIATE SPRAG
DISASSEMBLY, INSPECTION AND RE-ASSEMBLY
a. Disassembly
1. Remove intermediate sprag retainer snap ring and
retainer (fig. 80T).
2. Remove sprag outer race, bushings and sprag
assembly,
3. Turn unit over and remove backing plate to direct
clutch housing snap ring (fig. 8IT).
FORWARD CLUTCH ASSEMBLY
\
PUMP ASSEMBLY
Fig. 77T-lnstalling Forward Clutch Composition and Steel Plates
Fig. 79T—Air Checking Forward Clutch Assembly
CHEVROLET CHASSIS OVERHAUL MANUAL