Table of Contents
Advertisement
MAKE SURE THE MACHINE HAS BEEN TURNED OFF AND UNPLUGGED FROM THE POWER SOURCE BEFORE PERFORM-
ING ANY MAINTENANCE OR ADJUSTMENTS.
7.
Pull on the belt while turning one of the pulleys
counterclockwise until the belt comes off the pul-
ley.
9.
Install the new belt on the upper pulley first.
TO REDUCE RISK OF INJURY KEEP FINGERS ON TOP OF
THE THE BELT
11. Turn the upper pulley until the belt snaps into place.
22
8.
Remove the belt from the upper pulley.
10. Slide the belt onto the edge of the lower pulley.
Note: when re-installing all the parts, make sure the two
edges of the upper covers are flush as shown.
Advertisement
Table of Contents
