Connecting To A Dust Collector; Basic Adjustments And Controls; Connecting To A Power Source; On/Off Power Switch - General 30-060HC Setup & Operation Manual

13” heavy-duty bench-top planer - with helical cutter head
Table of Contents

Advertisement

BEFORE ASSEMBLING, MAKE SURE THAT THE SWITCH IS IN THE "OFF" POSITION AND THAT THE POWER CORD IS
UNPLUGGED. DO NOT PLUG IN OR TURN ON THE MACHINE UNTIL YOU HAVE COMPLETED THE ASSEMBLY AND
INSTALLATION STEPS DESCRIBED IN THIS SECTION OF THE MANUAL.

CONNECTING TO A DUST COLLECTOR

A dust port that fits 2 ½" & 4" hose is provided to accom-
modate connection to a dust collector (not included).
Be sure to use appropriate sized hose and fittings (not
included).
Check that all connections are sealed tightly to help
minimize airborne dust.
If you do not already own a dust collection system con-
sider contacting your General® International distribu-
tor for information on our complete line of dust collec-
tion systems and accessories or visit our Web Site at
www.general.ca.
BASIC ADJUSTMENTS & CONTROLS
TO REDUCE THE RISK OF SHOCK OR FIRE DO NOT OPERATE THE UNIT WITH A DAMAGED POWER CORD OR PLUG. RE-
PLACE DAMAGED CORD OR PLUG IMMEDIATELY. TO AVOID UNEXPECTED OR UNINTENTIONAL START-UP , MAKE SURE
THE POWER SWITCH IS IN THE OFF POSITION BEFORE CONNECTING TO A POWER SOURCE.

CONNECTING TO A POWER SOURCE

Once the assembly steps have been completed, plug the power cord into an appropriate outlet. Refer back to the
section entitled "Electrical Requirements" and make sure all requirements and grounding instructions are followed.
When operations have been completed unplug the machine from the power source.
TO AVOID UNEXPECTED OR UNINTENTIONAL
START-UP , MAKE SURE THAT THE POWER SWITCH
IS IN THE OFF POSITION BEFORE CONNECTING
TO A POWER SOURCE.

ON/OFF POWER SWITCH

This planer is equipped with a rocker style ON/OFF switch located on the front left hand side of the planer. To start
the planer, insert the lock-out key and pull up on the lower portion of the switch as shown, D. To stop the planer,
push down on the switch, E. To prevent unwanted or unauthorized start-up remove the lock-out key F and store it
in a safe place, out of the reach of children, whenever the planer is not in use.
SWITCH OFF
Note: Use the cord storage after using the machine.
D
E
POWER ON
POWER OFF
F
SAFETY KEY
(PREVENTS START-UP
WHEN REMOVED)
11

Advertisement

Table of Contents
loading

Table of Contents