Advertisement
3-2 How to Install
1) KEY BUTTON
OSD Key
MENU/EXIT
Activate and exit the OSD menu
▼
Move the OSD menu down
AUTO/▲
Move the OSD menu up and auto adjustment of PC source
◀ VOL
Decrease the level of volume and move the previous menu
VOL ▶/SELECT
Increase the level of volume and select the OSD menu
VIDEO 1
Select the Video 1 source, turn on VIDEO1-LED
VIDEO 2
Select the Video 2 source, turn on VIDEO2-LED
PC
Select the PC(RGB) source, turn on PC-LED
HDMI
Select the HDMI source, turn on HDMI-LED
Turn the power ON and OFF. There will be a small delay before the display
appears. The power LED goes green when the power is turned ON.
The power is turned off by pressing the power switch again and the power
LED goes Red.
Installation and User's Guide
Function
9
Advertisement
