Installation Diagram; Installation Of The Indoor Unit - Daikin RR20AVAK9 Installation & Service Reference

Installation Diagram

Installation of the Indoor Unit

The indoor unit must be installed so there is no
short circuit of the cool discharge. Respect the
installation clearances.
Do not install the indoor unit where there is di-
rect sunlight on the unit and the location must
be suitable for proper piping and drainage. Main-
tain a suitable distance between doors and the
unit.
Ceiling Concealed Mounting
• Use the hanger supplied with the unit.
Insulation for Indoor Connecting Pipe
Insulation material
(Field supplied)
Air outlet side
Aluminum tape
(Field supplied)
DETAIL A
17
Cork Tape Fully Insulated
Figure 8
See Detail A
Field Supplied
Washer for hanger bracket
(attached)
Tighten
Indoor Unit
Air inlet side
Aluminum tape
(Field supplied)
Figure 9