JB Systems CHALLENGER BSW Operation Manual page 10

ENGLISH USER MANUAL
• Use ▲/▼ buttons to toggle between [No] and [Yes].
• Press the [ENTER] button to confirm.
[Fixture Settings > Dimmer Curve]
Used to set the dimmer curve of the master dimmer.
• Press the [MENU] button to access the different functions in the menu.
• Press the ▲/▼ buttons until the desired function is showing on the display.
• Press the [ENTER] button: the values can be changed
• Use ▲/▼ buttons to selected the desired curve:
• Once you have the desired curve, press the [ENTER] button to save it.
[Fixture Settings > Dimmer Speed]
Used to set the dimmer speed of the master dimmer.
• Press the [MENU] button to access the different functions in the menu.
• Press the ▲/▼ buttons until the desired function is showing on the display.
• Press the [ENTER] button: the speed can be changed to [Fast] or [Smooth].
• Use ▲/▼ buttons to selected the desired dimming speed.
• Press the [ENTER] button to confirm.
[Fixture Settings > Show Focus]
Used to set the focus for a fixed distance. (works only in Show Mode)
• Press the [MENU] button to access the different functions in the menu.
• Press the ▲/▼ buttons until the desired function is showing on the display.
• Press the [ENTER] button: you can select 5m, 10 or 25m distance.
• Use ▲/▼ buttons to selected the desired dimming speed.
• Press the [ENTER] button to confirm.
[Display Settings > Display Inverse]
Used to turn the display over 180°. [Yes] = display is upsidedown.
• Press the [MENU] button to access the different functions in the menu.
• Press the ▲/▼ buttons until the desired function is showing on the display.
• Press the [ENTER] button: the display can be turned by selecting [Yes] or [No].
• Use ▲/▼ buttons to select the desired display position.
• Press the [ENTER] button to confirm.
[Display Settings > Backlight Switch]
Used to adjust whether the display stays lit or not after the last time it was used.
• Press the [MENU] button to access the different functions in the menu.
• Press the ▲/▼ buttons until the desired function is showing on the display.
• Press the [ENTER] button: the Backlight Switch can be turned [On] or [Off].
• Use ▲/▼ buttons to select [On] (display backlight will turn off after 30s) or [Off] (display stays lit).
• Press the [ENTER] button to confirm.
[Display Settings > Backlight Intensity]
Used to set the brightness of the backlight.
• Press the [MENU] button to access the different functions in the menu.
• Press the ▲/▼ buttons until the desired function is showing on the display.
• Press the [ENTER] button: the brightness of the backlight can be set from 000 to 010.
• Use ▲/▼ buttons to select the desired value.
• Press the [ENTER] button to confirm.
JB SYSTEMS 8/19 CHALLENGER BSW
®