Safety Guidelines - ADJ ECO UV BAR 50 IR User Manual

S A F E T Y I N S T R U C T I O N S A N D G U I D E L I N E S
DO NOT attempt installation and/or operation of devices without knowledge how to do so.
DO NOT permit operation by persons who are not qualified to operate these types of devices.
DO NOT shake devices, avoid brute force when installing and/or operating.
DO NOT operate device if the main power cord has become frayed, crimped and/or damaged.
Replace any damaged power cords with a similar power rating.
DO NOT remove or break-off the ground plug from the device power cords.
DO NOT remove or disassemble devices, there are NO user serviceable parts inside.
DO NOT Install the fixture near heat sources such as radiators, heat registers, stoves or other
appliances (including amplifiers) that produce heat.
ALWAYS disconnect devices from main power source before cleaning.
ALWAYS disconnect unit from main power before changing bulbs.
ALWAYS be sure to use this device in an area that will allow proper ventilation.
ALWAYS disconnect power cords during long periods of non-use.
Power cords should be safely routed and secured so they are not likely pinched.
Only use recommended rigging hardware as described in this guide.
Use the original packaging and materials to transport this device in for service.
These devices should be serviced by qualified service personnel when:
• The power cords or plugs have become damaged.
• Objects have fallen on and/or liquid has spilled into the devices.
• The devices have been exposed to rain and/or moisture.
• The devices do not operate normally or exhibit a marked change in performance.
6