Quick Start Guide For Setting Up The Current Time; Switch Display Mode And Change Settings; Time Display Mode - Nixie Clock IN-14 Quick Setup Manual

Quick Start Guide for setting up the current time

When the power on, the clock displays the current time. If the time it displays is
not correct, you need to set it by yourself. Here is the quick guide for you to set
the current time.
When power on, the clock
displays the
time, like 09:13:03;
Single Click
the [SET]
button
Now you can set the
HOUR(S). Use [+]/[-] key
to change the number.

Switch display mode and change settings

1. Time Display Mode

After power on initialization, the clock will display the current time in [HH.MM.SS.]
format, where [HH.] is the current Hours (in 00-23 or other range/style, depends on
the time format you have set), [MM.] is current Minutes (in 0~59), [SS.] is current
Seconds (in 0~59).
In this mode, after press the [SET] key down for at least 2-sec(Long Click),it will
switch to the time related setting mode, and you can short or long click the [+] and
[-] buttons to change the value, and single click the [set] button to switch to another
settings.
In this setting mode you can set:
[Display Effect: .xx.]: 00: Normal/ 01: Fading/ 02: Cross Fading/03: Slow Fading /04:
Flash /05: Loop/06: Random Loop;
Long Click
the [SET]
button
Displays
current current time
effect,
ignore it.
Single Click
the [SET]
button
key to change the number.
Single Click
the [SET]
button
current dots
Now you can set the
MINUTE(S).Use [+]/[-]
3
Single Click
the [SET]
button
Displays
effect,
ignore it.
Single Click
the [SET]
button
Current time
format, 024=
24H&0-leading,
ignore it.
Return to
the NORMAL
TIME DISPLAY
MODE.