Fan Coil Unit Address (Main/Rmc) Setting - Samsung AG026MN1DEH/EU Service Manual

4-1-3. Fan Coil Unit Address (MAIN/RMC) Setting

1. Check whether or not power is being supplied to the fan coil unit.
▶ If power is not being supplied, a separate power supply device will be required.
2. A panel or DISPLAY that can receive option inputs must be connected to the fan coil unit.
3. Depending on the air‑con installation conditions, the addresses (MAIN/RMC) of each fan coil unit must
be set.
4. Set the addresses (MAIN/RMC) of each fan coil unit using the remote controller.
▶ The initial setting value of the fan coil unit address (MAIN/RMC) is "0A0000‑100000‑200000‑300000".
Option No. : 0AXXXX‑1XXXXX‑2XXXXX‑3XXXXX
Option SEG1
Explanation Page
Remote
controller
display
Indication Details
Indication
and details
0
Option SEG7
Explanation Page
Remote
controller
display
Indication Details
Indication
and details
1
● If "A"~"F" is inputted in SEG5~SEG6, the fan coil MAIN address will not be changed.
● If "0" is inputted in SEG3, the fan coil will maintain the existing MAIN address even if an option value is inputted in SEG5~SEG6.
caution
● If "0" is inputted in SEG9, the fan coil will maintain the existing RMC address even if an option value is inputted in SEG11~12.
SEG2 SEG3
Mode MAIN address setting MAIN address setting
Indication Details Indication
0
A
1
SEG8 SEG9
RMC address setting
Indication
No function
0
1
SEG4
Details Indication Details
Do not set
address
Hundreds
0~9
digit
Address
setting
mode
SEG10
Details
No function
Do not set
address
Address
setting
Mode
4-10
Trouble shooting
Fan coil unit
1(L)
2(N)
SEG5 SEG6
Fan coil address tens Fan coil address units
digit digit
Indication Details Indication
0~9 Tens digit 0~9
SEG11 SEG12
Group channel (*16) Group address
Indication Details Indication
RMC1 0~2 RMC2
F2
F1
Details
Units digit
Details
0~F