Table of Contents
Advertisement
No
Parts
5
Pan and motor
6
Temperature sensor
Procedure
2) Remove the 2 screws to remove the drain
hose fastened at the bottom of the side of
the fan coil unit (use +SCREWDRIVER).
1) Remove the hexagonal nut at the top of the
fan to separate the fan from the motor (use
Monkey spanner).
2) Remove the 3 hexagonal nuts fastening the
motor to separate the motor and the fan
coil unit (use Monkey spanner).
1) Remove the 6 screws on the evaporator and
remove the partition.
2) Remove the temperature sensor attached
to the evaporator pipe along with the
fastening clip.
3-31
Disassembly and Reassembly
Remark
Hide quick links:
Advertisement
Table of Contents
