Troubleshooting; Environmental Protection; Available Accessories - Promac 349V Operating Instructions Manual

Deactivating the machine
If the machine is to be inactive for a long period, prepare
the machine as follows:
- Detach the plug from the electric supply panel.
- Carefully clean and grease the machine.
- If necessary, cover the machine
9. Trouble shooting
Motor doesn't start
*No electricity-
check mains and fuse.
*Defective switch, motor or cord-
consult an electrician.
*Overload has reacted-
Wait for automatic reset.
Machine vibrates excessively
*Stand on uneven surface-
adjust for even support.
*saw blade has cracks-
replace saw blade immediately
*Tool heavy a cut-
reduce feed pressure and feed speed.
Cut is not square
*Saw arm setting is bad
*Blade guide setting is bad.
*Saw blade is dull.
Cutting surface is bad
*Wrong saw blade chosen
*Saw blade is dull
*Blade guide setting is bad
*Blade tension too low
*Feed pressure too high
*Feed speed too high

10. Environmental protection

Protect the environment.
Your appliance contains valuable materials which can be
recovered or recycled. Please leave it at a specialized
institution.

11. Available accessories

Article number 10048
foldable stand
Article number 2168
Stick wax
Refer to the pricelist for various saw blades.
8