Option
Boot Sequence
UEFI boot path security
Date/Time
System Configuration screen options
Table 4. System Configuration options
Option
UEFI Network Stack
Integrated NIC
SATA Operation
Drives
SMART Reporting
Description
This option enables you to change the order in which the system
boots an operating system.
•
Default Boot Sequence
•
Windows Boot Manager
•
UEFI: Hard Drive, Partition 4
•
Boot List Option: You can add a boot option, delete an existing
boot option, and view the boot options.
This option enables you to control the system prompt of How to
enter the Admin Password (if set) when you boot a UEFI boot
path from the F12 boot menu.
The options include:
•
Always, except internal hard drive (default)
•
Always
•
Never
This option enables you to change the system date and time.
Description
If the UEFI Network Stack option is enabled, the UEFI
Networking Protocols are installed and allows pre-operating system
and early operating system networking features to use any enabled
NICs or SFP.
The UEFI Network Stack option is enabled by default.
The Integrated NIC option controls the on-board LAN controller.
The options include:
•
Disabled—The internal LAN is off and not visible to the
operating system.
•
Enabled—The internal LAN is enabled.
•
Enabled w/PXE—The internal LAN is enabled (with PXE boot).
This option is enabled by default.
This option configures the operating mode of the integrated SATA
hard drive controller. The options include:
•
Disabled
•
AHCI—enabled by default
Allows you to configure the SATA drive on board and the M.2 PCIe
SSD.
•
SATA-0 enabled by default
•
M.2 PCIe SSD-0
This field controls whether the hard drive errors of integrated
drives are reported during system startup.
System setup
45