System Configuration Screen Options - Dell Vostro 3070 Setup And Speci?Cations

Option Description
•
•
Boot Sequence
Boot Sequence
Boot List Options
Advanced Boot This option allows you the legacy option ROMs to load.
Options
•
•
.
UEFI Boot Path This options control whether or not the system will prompt the user to enter the Admin password (if set) when
Security booting a UEFI boot path from the F12 Boot Menu
•
•
•
Date/Time Allows you to change the date and time.

System Configuration screen options

Option Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
•
•
•
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
•
•
•
Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
•
SMART Reporting This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.
•
16 System setup
Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum
Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit
technology.
Device Information: Displays Primary Hard Drive, SATA-0LOM MAC Address, Video Controller, Audio
Controller.
Allows you to change the order in which the computer attempts to find an operating
system. The options are:
• Windows Boot Manager
• Onboard NIC(IPV4)
• Oboard NIC(IPV6)
By default, all the options are checked. You can also deselect any option or change the
boot order.
Allows you to change the boot list option:
• Legacy External Devices
• UEFI (default)
By default, the Enable Legacy Option ROMs is enabled
This option allows you the legacy option ROMs to load. By default, the Enable Attemot Legacy Boot is
disabled.
Always Except Internal HDD (default)
Always
Never
Disabled
Enabled
Enabled w/PXE: This option is enabled by default.
Disabled
AHCI
RAID On(default)
SATA-0
Enable SMART Reporting