Speakers; Removing The Speakers; Installing The Speakers - Dell Wyse 5470 Service Manual

Speakers

Removing the speakers

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
About this task
The following image indicates the location of speakers and provides a visual representation of the removal procedure:
Steps
1. Disconnect the speaker cable from the system board.
2. Remove the speaker cable from the routing guide on the VESA-mount bracket.
3. Note the speaker-cable routing on the display bezel and remove the screw (M3x5) that secures the cable to the middle frame.
4. Peel off the tape from the VESA-mount bracket.
5. Lift the speakers, along with the speaker cable, off the display assembly.

Installing the speakers

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speakers and provides a visual representation of the installation procedure.
Before working on your thin client.
Removing and installing components 35