System Configuration Screen Options - Dell Vostro 5090 Service Manual

System Configuration screen options

Option Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
•
•
•
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
•
•
•
Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
•
•
•
•
•
SMART Reporting This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.
•
USB Configuration This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
•
•
•
Front USB This field enables or disables the front USB configuration
Configuration
•
•
•
•
•
•
* denotes a USB 3.0-capable port
Rear USB This field enables or disables the front USB configuration
Configuration
•
•
•
•
•
•
* denotes a USB 3.0-capable port
Audio This field enables or disables the integrated audio controller. By default, the Enable Audio option is selected. The
options are:
58 System setup
Disabled
Enabled
Enabled w/PXE: This option is enabled by default.
Disabled
AHCI (default)AHCI
RAID On(default)
SATA-0
SATA-1
SATA-2
SATA-3
M.2 PCIe SSD-0
Enable SMART Reporting
Enable USB Boot Support (default)
Enable Front USB Ports(default)
Enable Rear USB Ports (default)
NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.
Rear Port 1(Bottom Left): This option is enabled by default.
Rear Port 2 (Bottom Right): This option is enabled by default.
Rear Port 1 (Top Left): This option is enabled by default.
Rear Port 2 (Top Right): This option is enabled by default.
Front Port 1 (Bottom Right)* (default)
Front Port 2 (Bottom Left)* (default)
Front Port 1(Left): This option is enabled by default.
Front Port 2 (Right): This option is enabled by default.
Rear Port 1
Rear Port 2
Rear Port 3 (w/RJ-45)
Rear Port 4 (w/RJ-45)