Battery Installation; Strap Installation - ADC Advantage 2200 Directions For Use Manual

Fingertip pulse oximeter

Hide thumbs Also See for Advantage 2200:

Table of Contents

Battery Installation

1. Slide off battery cover in direction of arrow.

2. Put the two AAA batteries into battery compartment by observing correct polarity.

3. Slide the battery cover on by reversing Step #1.

Note:

• Battery polarity should be observed to prevent damage to the device.

• When battery is low, the battery indicator symbol on the display will flash. Replace low battery

as soon as possible. Remove battery if the device will not be used for more than 30 days.

1. Thread thinner end of the strap through the loop.

2. Thread thicker end of the strap through the threaded end before pulling it tightly.

(figure 1)

(figure 2)

(Figure 2)

(Figure 1)

Table of Contents

Do you have a question about the Advantage 2200 and is the answer not in the manual?