Other Information; Sockets - THOMSON IFC130 Owner's Manual

IFC130-P_EN 5/08/05 9:48
AV1
EN
AV2
stereo
Page 20

Sockets

AV1 SCART socket (input-output) at the back
This socket can be used to connect a range of equipment, including video recorders,
camcorders (VHS, S-VHS, 8 mm or Hi 8 format), decoders, satellite receivers, DVD players,
games consoles or devices producing an RGB signal.
AV2 SCART socket (input) at the back
This socket can be used to connect equipment, such as video recorders or camcorders
(VHS, S-VHS, 8 mm or Hi 8 format).
AV3 RCA audio + video sockets (input) on the side
These can be mainly used to connect camcorders (VHS or 8 mm format).
AV3 RCA audio + S sockets (input) on the side
These can be mainly used to connect camcorders (S-VHS or Hi 8 format).
CMP component sockets (Y Pb/Cb Pr/Cr) + RCA audio sockets
(input) at the back
These can be used to connect a DVD player.The component sockets automatically detect
the type of component signal received: interlaced component (YPrPb) or progressive
component (YCrCb).
VGA socket (15 pin) + audio socket (input) at the back
These can be used to connect a computer.
jack
HDMI socket (input) at the back
This can be used to connect a PC with a compatible video card installed, certain DVD
players or a high-definition compatible digital satellite decoder.This socket allows a very
HDMI
high transmission quality for the video and audio signals.To connect a device with a DVI
socket, you can use the HDMI socket and the RCA audio sockets. In this instance, the
HDMI socket is used for receiving the video signal and the RCA sockets for receiving the
audio signal. An HDMI-DVI cable is required.
Notes:
R
- Do not connect a device supplying analogue RGB signals to this socket.
- The HDMI socket is compatible with HDCP format.
audio (DVI)
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
L
registered trademarks of HDMI Licensing LLC.
To display images using the equipment connected, press the
control: once to select AV1, twice to select AV2, etc. For some equipment (connected to
the SCART sockets), this selection is done automatically.

Other information

20
AV button on the remote