Names And Functions Of Parts; Bottom; Back - Genie DN83SPX/12 Instruction Manual

■ Names and Functions of Parts

Bottom

④
④ Mounting bracket screw hole
Use the screw hole when fixing the camera
onto the mounting bracket.
Please use the clamp screw as specified
in the picture.
※ The mounting bracket can be separated and
attached on the top of the camera.
please do not tighten the screw to a depth of
more than 5mm, otherwise serious damage
can occur to the inside of the camera.
PIXIM Digital Day/Night Bodied Camera
10

Back

⑤ Auto iris lens connector
This is the connection terminal for the auto iris lens.
⑥ Auto iris lens selection switch
Change the mode to DC or VIDEO depending on the type of auto iris
lens being used.
⑦ OSD Extra
Connects to the remote controller(option) when you want to install remotely.
L
⑧ Video output terminal
Sends video signals and connects to the video input terminal of the
monitor.
⑨ Power lamp
Lights up when the correct power is supplied to the camera.
⑩ Setting button
● SET button : Used for the menu display. This button can be used
to confirm settings after changing the value of the selected function
or current conditions.
● UP & DOWN buttons : Used for selecting items by moving the
cursor up or down on the menu screen.
● LEFT & RIGHT buttons : Used when changing item values, by
moving the cursor to the left or right on the menu screen.
⑪ Power input terminal
Connects to the power appropriate to each power requirement.
Names and Functions of Parts ■
⑤ ⑥ ⑦ ⑧
IRIS JACK OSD EXTRA
VIDEO OUT
POWER
⑨
DC
⑪
SET
AC24V IN VIDEO
DC12V IN
11
PIXIM Digital Day/Night Bodied Camera
⑩