Manual Power On; Manual Power Off; Reset The Car Dvr; Initial Settings - NanoCam Plus NCP-DVR1080P User Manual

5.3

MANUAL POWER OFF

Make sure that recording has been stopped and then press the
button on the lower right hand side of the car DVR. After powering down
the device please wait for 10 seconds before turning the Car DVR back on.
5.4

RESET THE CAR DVR

If the Car DVR does not function normally, try restarting the car DVR. To
restart the car DVR, using a small pin press and hold the Reset button on
the bottom side of the camera.
6.0

INITIAL SETTINGS

Before using the Car DVR we recommend Formatting the Inserted Micro
SD Card and setting the correct Time and Date.
6.1

FORMATTING THE INSERTED MICRO SD CARD

Formatting the Micro SD card will delete all information on the inserted
Micro SD Card and prepare the card for use with the Car DVR.
1. Press the
2. Press the
3. Use the
highlight the Format setting and press the right
Button to stop the Car DVR from recording.
Menu Button to enter the Settings Menu.
and Buttons to navigate the Settings Menu and
Power
to select.
17