THOMSON VMD 22 User Manual page 93

92
EN
Indications
COPYING FAILED
MEMORY CARD!
PLEASE
FORMAT
NO STORED
DATA
NO SOUND DATA
NO STORED IMAGE
NO E-CLIP DATA
UNSUPPORTED DATA
E01 — E06
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY
VMD22 EN(66/100)
Appears if dubbing of copyguarded signals is attempted while this
camcorder is being used as a recorder.
Appears in the following cases when dubbing from a tape to a
MultiMediaCard (as digital stills or video clips):
– when no MultiMediaCard is loaded.
– when the MultiMediaCard's memory is full.
– when the MultiMediaCard is not formatted.
Appears in the following cases when dubbing still images or sound effects
stored in the MultiMediaCard's memory to a tape:
– when condensation occurs.
– when no tape is loaded.
– when the erase protection tab is set to "SAVE".
– when a tape in another format is loaded.
– when the tape ends.
Appears if a MultiMediaCard is not loaded when SNAPSHOT is pressed
while the POWER Switch is set to "
" " or " ".
Appears when there is a problem with a MultiMediaCard and its memory is
corrupt, or it has not been initialised. Initialise the MultiMediaCard.
Appears when the POWER Switch is set to "
stored in the MultiMediaCard.
Appears if there are no sound files stored in the MultiMediaCard when
DIGITAL SOUND is pressed.
Appears when the POWER switch is set to "
deleted.
Appears when the POWER switch is set to "
files are deleted.
Appears when a file in a format other than MP3 is selected.
The error indications (E01 — E06) show what type of malfunction has
occured. When an error indication appears, the camcorder turns off
automatically. Remove the power supply (battery, etc.) and wait a few
minutes for the indication to clear. When it does, you can resume using the
camcorder. If the indication remains, consult your nearest THOMSON dealer.
92
INDEX
Indications (cont.)
Function
" and the MODE Dial is set to
" and there are no files
" and all image files are
" and all E-clip recording
29/08/00, 15:48
( pg. 64)
( pg. 50)