Automatic On/Off Settings - Carrier 40VM Series Installation And Operating Instructions Manual

Press the left or right button within 3 seconds to switch be-
tween the set temperature for cooling and heating in AUTO
mode as shown in Fig. 13.
Fig. 13 — Switching Between Cooling and
Heating
The set temperature range for cooling and DRY mode on
º
the wired controller is 62 F to 86
The set temperature range for heating on the wired control-
º º
ler is 54 F to 86 F.
Automatic ON/OFF Settings —
button to enter automatic-on settings. The screen displays the
timer, and the automatic-on icon is on as shown in Fig. 14.
Fig. 14 — Entering the Automatic-on Menu
º
F.
Press the TIMER
Press TEMP. UP or TEMP. DOWN within 3 seconds to ad-
just the automatic-on time as shown in Fig. 15.
Fig. 15 — Adjusting the Automatic-on Time
If you press OK or do not press any button within 3 sec-
onds, the wired controller will confirm the set time and exit the
automatic-on/off setting status as shown in Fig. 16.
Fig. 16 — Confirming the Automatic-on Time
When the automatic-on time is set to a value other than 0.0H,
the automatic-on setting is valid and the IDU will be turned on
at the set time.
When the automatic-on time is set 0.0H, the automatic-on
setting is canceled.
Press TIMER twice on the main interface to enter automatic
off settings. The screen displays the timer, and the automatic-
off icon is on.
5