Table of Contents
Advertisement
Wireless DALI control unit, 1-gang Mini
Parameters
Priority, lock-out protection
Activate lock-out protection
brightness value
Deactivate lock-out protection
brightness value
Priority, restraint
Activate forced operation
brightness value
Deactivate forced operation
brightness value
Priority, wind alarm
Activate wind alarm brightness
value
Deactivate wind alarm bright-
ness value
32580922
10864978
Setting options, Basic setting
0...4
Basic setting: 1
0...100 %
Basic setting: 0 %
0...100 %
Basic setting: 0 %
0...4
Basic setting: 2
0...100 %
Basic setting: 100 %
0...100 %
Basic setting: 0 %
0...4
Basic setting: 3
0...100 %
Basic setting: 0 %
0...100 %
Basic setting: 0 %
22.08.2019
Explanations
the dim down ramp is applied.
If, during the dim down opera-
tion, another command is
given, e.g. switch on or scene
recall, then the switch-off
warning stops and the com-
mand is executed. A switch-off
command restarts the time for
the switch-off warning.
Note: The set time apply to
operation using radio transmit-
ters. The device is switched
immediately when the Prog
button is pressed.
Specifies the priority for recall-
ing and removing a scene of
type Lock-out protection for
the channel.
Note: 1 is the highest priority
and 4 the lowest. 0 means no
priority.
Defines the behaviour of the
output on activating the lock-
out protection.
Defines the behaviour of the
output on deactivating the
lock-out protection. Only vis-
ible when the priority for the
lock-out protection is 0.
Specifies the priority for recall-
ing and removing a scene of
type Restraint for the channel.
Defines the behaviour of the
output on activating the forced
operation.
Defines the behaviour of the
output on deactivating the
forced operation. Only visible
when the priority for the forced
operation is 0.
Specifies the priority for recall-
ing and removing a scene of
type Wind alarm for the chan-
nel.
Defines the behaviour of the
output on activating the wind
alarm.
Defines the behaviour of the
output on deactivating the
wind alarm. Only visible when
the priority for the wind alarm
is 0.
11 / 14
Advertisement
Table of Contents
