Parts List; Stroller Assembly - Joovy Kooper X2 Instruction Manual

Parts List

Stroller
Rear
Wheels (2)
6

Stroller Assembly

I WARNING:
tools required.
Unfolding the Stroller
• Orient the stroller with the handle facing upward. Release the safety latch located on the left side
of the stroller. (1)
• Pull upwards on the handle. (2) Keep pulling until the stroller is fully erected and the folding hinge
on each side engages.
• Visually check and gently push downward on the handle to ensure that the stroller is completely
opened and locked before ANY use of the product.
I WARNING:
Tray
unfolding. ALWAYS ensure the folding mechanism on each side of the
handlebar is fully engaged when the stroller is in the opened position. This
action will prevent collapse of the stroller. Possible pinching hazard – Be
careful when unfolding the stroller.
1
Front
Wheels (2)
Installing/Removing the Front Wheels
• Slide one front wheel into the front wheel housing until it clicks into place. (3) Repeat for the other
two wheels. Pull on the wheels to ensure they are installed properly.
• To remove, press the metal release button on the back of the front wheel housing and pull away
from the stroller. (4)
3
Adult assembly is required for this product. No
Keep children away from stroller while
2
4
7