Adjusting The Feet; Power Connection; Water Connection - Beko GNE60520DX User Manual

Installation

3.3. Adjusting the feet

If the product is not in balanced position,
adjust the front adjustable feet by
rotating right or left.

3.4. Power connection

A
WARNING:
extension or multi sockets in
power connection.
B
WARNING:
cable must be replaced by
authorised Service.
C When placing two coolers in
adjacent position, leave at
least 4 cm distance between
the two units.
Do not use
Damaged power
8 / 40 EN
• Our firm will not assume
responsibility for any damages
due to usage without earthing and
power connection in compliance with
national regulations.
• The power cable plug must be easily
accessible after installation.
• Do not use multi-group plug with or
without extension cable between the
wall socket and the refrigerator.

3.5. Water connection

(Optional)
A
WARNING:
and the water pump (if available)
during connection.
The product can be connected to a
carboy or directly to the water mains,
depending on the model. To establish
the connection, the water hose must
first be connected to the product.
Check to see the following parts are
supplied with your product's model:
1
2
3
1. Connector (1 piece): Used to attach the
water hose to the rear of the product.
2. Hose clip (3 pieces): Used to fix the
water hose on the wall.
Refrigerator / User Manual
Unplug the product
4 *5