Table of Contents
Advertisement
Installation
3.2. Installing the
plastic wedges
Plastic wedges are used to create the
distance for the air circulation between
the product and the rear wall. Insert
the 2 plastic wedges onto the rear
ventilation cover as illustrated in the
figure. To install the wedges, remove
the screws on the product and use the
screws given in the same pouch with the
wedges.
3.3. Electrical connection
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the rating plate.
Our company shall not be liable for
any damages that will arise when the
product is used without grounding in
accordance with the local regulations.
• Electrical connection must comply
with national regulations.
• Power cable plug must be within easy
reach after installation.
• The voltage and allowed fuse or
breaker protection are specified in the
Rating Plate which is affixed to interior
of the product. If the current value of
the fuse or breaker in the house does
not comply with the value in the rating
plate, have a qualified electrician
install a suitable fuse.
• The specified voltage must be equal to
your mains voltage.
• Do not make connections via
extension cables or multi-plugs.
B
WARNING:
cable must be replaced by the
Authorised
WARNING:
B
has a failure, it should not be
operated unless it is repaired by
the
There is the risk of electric shock!
3.4. Adjusting the feet
If the product stands unbalanced after
installation adjust the feet. Taking
help from someone to slightly lift the
refrigerator will facilitate this process.
WARNING:
B
product. Product must not be
plugged in when adjusting the
feet. There is the risk of electric
shock!
Turn the front feet to balance the
product. The corner where the foot
exists is lowered when you turn in the
direction of arrow and raised when you
turn it in the opposite direction.
10 / 26 EN
Damaged power
Service Agents.
If the product
Authorised
Service Agent!
First unplug the
Refrigerator / User Manual
Advertisement
Table of Contents
