For Products Using Water Carboy - Beko GNE60520DX User Manual

Installation
3. Attach the connector around the water
hose.
4. Attach the connector into the tap
adaptor and tighten by hand / tool.
5. To avoid damaging, shifting or
accidentally disconnecting the hose,
use the clips provided to fix the water
hose appropriately.
A
WARNING:
tap on, make sure there is no
water leak on either end of the
water hose. In case of leakage,
turn the valve off and tighten all
connections using a pipe wrench
or pliers.
3.8. For products
using water carboy
(Optional)
To use a carboy for the product's
water connection, the water pump
recommended by the Unauthorised
service must be used.
1. Connect one end of the water hose
provided with the pump to the product
(see 3. 6) and follow the instructions
below.
2. Connect the other end of the water
hose to the water pump by pushing the
hose into the pump's hose inlet.
10 / 40 EN
After turning the
Refrigerator / User Manual