Preparation; What To Do For Energy Saving; First Use - Beko GNE60520DX User Manual

4

Preparation

4.1. What to do for
energy saving
A Connecting the product to
electronic energy-saving systems
is harmful, as it may damage the
product.
• Do not keep the refrigerator doors
open for long periods.
• Do not place hot food or beverages
into the refrigerator.
• Do not overfill the refrigerator;
blocking the internal air flow will
reduce cooling capacity.
• To be able store maximum food in
the freezer compartment of your
refrigerator, the upper drawers have
to be removed and placed on top of
wire rack. The net volume and energy
consumption values specified in the
energy label of the refrigerator was
tested after removing the freezer
compartment's upper shelf and
the ice container which can easily
be removed manually. Using the
lower drawer while loading is highly
recommended.
• Depending on the product's features;
defrosting frozen foods in the cooler
compartment will ensure energy
saving and preserve food quality.
• Make sure the foods are not in
contact with the cooler compartment
temperature sensor described below.
• Food must be stored in drawers inside
the cooler compartment in order to
provide energy saving and preserve
the food in a better ambient.
• Prevent direct contact between the
temperature sensor in the freezer
compartment and the food packages.
Energy consumption may increase in
case of a contact with the sensor.
Refrigerator / User Manual

4.2. First use

Before using your refrigerator, make sure
the necessary preparations are made
in line with the instructions in "Safety
and environment instructions" and
"Installation" sections.
• Keep the product running with no
food inside for 6 hours and do not
open the door, unless absolutely
necessary.
C
A sound will be heard when the
compressor is engaged. It is
normal to hear sound even when
the compressor is inactive, due to
the compressed liquids and gasses
in the cooling system.
C
It is normal for the front edges of
the refrigerator to be warm. These
areas are designed to warm up in
order to prevent condensation.
C
In some models, indicator panel is
dimmed automatically 5 minutes
after the door is closed. It will be
activated again when the door is
opened or any key is pressed.
15 / 40 EN