Declaration Of Conformity - Eaton xComfort CSAU-01/01-10 Manual

Declaration of Conformity

We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare that product (family)
Eaton - Switching actuator,
CSAU-01/01-10.., CSAU-01/01-16.. (contains RF-Modul
CSCZ-01/xx)
(the declaration of conformity applies to all
listed types within our actual product catalog)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and "good engineering practices"
complies with the provisions of Council directive(s):
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
Radio and Telecommunications Terminal Equipment 99/05/EC
RoHS Directive 2011/65/EU
based on compliance with European standard(s):
EN60669-2-1/10; EN50428/05 + A1/07 + A2/09
covered by RF-Modul CSCZ-01/xx: EN301489-3 V1.6.1, EN300220-2
V2.4.1, EN50491-5-1/10, EN50491-5-2/10, EN60950-1/06 + A11/09 +
A1/10 + A12/11 + A2/13, EN62479/10
tested by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark: 2014
Doc.Id.: CSAU-01/01-10.., CSAU-01/01-16.. (contains RF-Modul CSCZ-01/xx)
Heinz Ursprunger
Director Product Line
& Marketing Management
4
01.12.2014
Friedrich Schröder
Director Quality
& EHS