Advertisement
DISMANTLING
•
Grip the cover in one hand and the grinder in the other.
•
Turn the cover to move the pointer
to unlock
.
•
Lift the cover off.
•
Lift the motor unit off the grinder
FIT BATTERIES
•
For maximum performance, always use good quality batteries.
•
Fit 4 AA batteries (not included) into each motor unit.
•
The polarities ("+" & "-") are marked on the battery compartment.
FILL THE GRINDERS
•
Ensure you are using grinder quality seasoning.
•
Fill the grinders with peppercorns, sea salt, dried herbs or spices.
•
Do not overfill; this will cause problems during reassembly.
ASSEMBLING
•
Align the pointers
Lower the motor unit onto the grinder.
•
Align the cover pointer
firmly.
•
Turn the cover to align the pointer
ADJUST THE GRIND
•
Tip the whole mill upside down and turn the knob clockwise towards the "-"
until it won't turn any further.
•
Turn the knob one turn anti-clockwise towards the "+".
NOTE: Do not turn the knob more than 6 complete rotations clockwise towards the
"+". This may unscrew the knob from the spindle.
•
Tip the mill right way up and press and release the button.
•
Check the grind size and if required, readjust to suit.
•
Sit the mill on the base.
•
Do the same for the other mill.
USING THE MILLS
•
Hold the mill directly over food to be seasoned and press the button. The motor will
run while the button is pressed.
•
Release the button to stop the motor.
on the motor unit with the lock and unlock
with the unlock on the grinder and push the cover down
from lock
with the lock
.
on the grinder.
Advertisement
