Control Panel And Features - ACP HDC Series Owner's Manual

Control Panel and Features

STYLE 1
Note: There are three styles of controls shown Style 1, Style 2, and Style 3. Choose the control that matches unit.
Control panel coloring may vary by model
(A) (B)
Control Panel Features
(A) USB PORT
Standard USB flash drive compatible. Allows for import/export of
programmed settings and user options, and to update firmware.
(B) DISPLAY
2.8" Color LCD Display
(C) NUMBER KEYPADS
Used to operate preset cooking programs; enter settings; navigate
through display; and/or activate secondary keypad functions.
(D) START/OK KEYPAD
Begins cooking in Manual Time Entry Mode. Restarts an
interrupted cooking cycle. Used to save settings and entries.
Toggles through pages in Programming and User Option Modes.
(E) STOP/RESET KEYPAD
Interrupts operation, and/or exits modes and menus
General Display Screens
READY SCREEN
Indicates oven is ready to operate. The operator may press keypads to
begin preset programs or to activate secondary keypad functions.
• Menu A/B disabled
• Quantity X2 disabled
©2019 ACP, Inc.
Cedar Rapids, IA 52404
(i) (ii) (iii) (iv)
• Menu A open
• Quantity X2 enabled
Page 6 of 22
(C)
(F)
(v) (vi)
(F) SECONDARY FUNCTION KEYPADS
To activate, press and hold corresponding number keypad for
0.75 seconds.
Note: Press and hold time can be set between 0.75 – 2 seconds
by factory option.
Manual Time Entry Mode (keypad "1")
(i)
Allows the operator to heat without changing the preset
program keypads.
Power Level (keypad "2")
(ii)
Use to set microwave power level between 0% to 100%
in 10% increments (1 = 10% power, 2=20%, 3=30%, etc.)
while in Manual Time Entry Mode.
Used to edit COOK FACTOR while in Programming Mode.
(iii) Programming Mode (keypad "3")
Edit preset programs and/or create new programs for
customized cooking.
(iv) User Options (keypad "4")
Allows the user to customize various oven settings.
X2 - Double Quantity Cooking (keypad "5")
(v)
Increases a preset cook time by a percentage of the original
cook time, also know as a COOK FACTOR. Used for
cooking multiple servings of foods.
(vi) Menu A/B (keypad "6")
Toggles menu selection between two sets of programmed
cook settings. "Menu A/B" function only available when
factory option ALLOW AB MENU is enabled
STANDBY SCREEN
(D) (E)
DOOR OPEN SCREEN
Part No. 20267401
Original Instructions