Table of Contents
Advertisement
User Options
STYLES 2 & 3
Changing User Options
This allows the user to customize various oven settings. Options such as single or double digit
keypad programming, beep volume, and maximum cooking time can be changed to suit individual
preferences.
Open oven door and press and hold number keypad "2" for 5 seconds. The oven beeps.
1.
• Style 2: Display shows "OPTIONS"
• Style 3: Display shows "OP:"
Note: If STOP/RESET keypad is pressed before programming is complete,changes are
discarded and microwave exits programming mode.
2.
Press any number keypad to enter related options as noted in chart below.
3.
To change, repeat pressing the number keypad until desired setting is reached.
• Each time the keypad is pressed, option will change.
• Match code displayed with code for desired option.
4.
Press START keypad to save the selected setting.
5.
To exit User Option Mode, press STOP/RESET keypad and close door.
KEYPAD
DISPLAY
1
OP:10
End of Cycle Beep
OP:11
OP:12
2
OP:20
Speaker Volume
OP:21
OP:22
OP:23
3
OP:30
Key Beep
OP:31
4
OP:40
Keyboard Enable
OP:41
Window
OP:42
OP:43
5
OP:50
Add Time During Heating
OP:51
6*
OP:60
Reset Door Open
OP:61
7*
OP:70
Maximum Heating Time
OP:71
8
OP:80
Manual Operation
OP:81
9
OP:90
Double Digit Operation
OP:91
0
OP:00
Clean Filter Message
OP:01
OP:02
OP:03
*Factory setting may vary by model
©2019 ACP, Inc.
Cedar Rapids, IA 52404
OPTIONS ( FACTORY SETTINGS IN BOLD )
3 second continuous beep
Continuous beep until door is opened
5 beep bursts until door is open
Eliminates beep
Sets volume to low
Sets volume to medium
Sets volume to high
Prevents beep when keypad is pressed
Allows beep when keypad is pressed
15 seconds after oven door is opened, keyboard disabled
30 seconds after oven door is opened, keyboard disabled
1 minute after oven door is opened, keyboard disabled
2 minutes after oven door is opened, keyboard disabled
Prevents adding heating time while oven is heating
Allows heating time to be changed while oven is heating when a memory keypad is pressed
Allows oven to resume heating time countdown after door is opened during cycle
Cancels heating time count down after door is opened during cycle.
Allows 60 minutes of heating time
Allows 10 minutes of heating time
Allows use of preprogrammed keypads only
Allows use of manual time entry and preprogrammed keypads
Allows 10 (0-9) preprogrammed keypads (Single Keypad Cooking)
Allows 100 (00-99) preprogrammed keypads (Double Keypad Cooking)
Do not display message
Display message for 24 hours every 7 days
Display message for 24 hours every 30 days
Display message for 24 hours every 90 days
Page 18 of 22
Part No. 20267401
Original Instructions
Advertisement
Table of Contents
