Table of Contents
Advertisement
All manuals and user guides at all-guides.com
IC Live Users Manual, ICL-F & ICL-F-DUAL
As you can see, Beamware 2 has found 2 Columns on the Network. The red box indicates they have not yet been assigned to an Array. The
box will change to green after the Columns are assigned to an Array and the configuration files have been loaded into the Array. The "not
synchronized" listing means they are lacking the configuration files.
If you were to check the Layout window now, you would find that the original yellow array outline has changed to red. The 3 major sections
of Beamware 2 are linked together.
The easiest way to assign one of the Columns to an Array is to grab it using the cursor and left mouse button and drag it to one of the
Column icons. Notice that the color of the Column icon changes when a Column is assigned to it.
One issue that may arise, especially in large projects where many Columns/Arrays are involved is which Column is represented by which
icon. To make sure this won't be a problem, Beamware provides a means of sending a tone signal through each individual column. Selecting
a Column and right clicking will open the pop up menu shown below. Clicking on Test Tone will send a signal through the selected Column.
27
Advertisement
Table of Contents
