Renkus-Heinz Iconyx IC Live ILC-F-DUAL User Manual page 17

All manuals and user guides at all-guides.com
IC Live Users Manual, ICL-F & ICL-F-DUAL
ARRAY PROPERTIES
The Array Properties section of BeamWare 2 is where the Array's sonic
output is aimed, analyzed and adjusted to optimize its coverage of the
audience area(s); i.e, where the sound is steered onto the audience.
The Array Properties section of BeamWare 2 is opened by clicking on
the Array Properties tab located below the tooll bar section in the main
BeamWare window. Note that the program will not allow you to enter the
Array Properties section until you have added at least one array to the
project. If you added more than one array, but didn't select one of them,
a Select Array prompt will list the arrays you inserted into the project
under Layout and ask you to select one of them. Note that you can also
enter the Array Properties window by clicking on Edit in the lower left
corner of the layout screen.
Select one of the arrays and press OK to open the Array Properties window shown below.
The IC Configuration section on the left side of the screen is where the array is configured for optimum performance. The Audience Area
section on the right side of the window controls the size and location of the Audience Areas, and the center section of the screen displays
the acoustical performance.
A fourth Mapping section allows you to establish the mapping criteria.
17