Table of Contents
Advertisement
All manuals and user guides at all-guides.com
IC Live Users Manual, ICL-F & ICL-F-DUAL
The next step is to add an Iconyx array to the project and place it in the graphic. There are several ways to do this. You can go to the
Project pull down menu, select Add Array and click on the array you want to add or you can go to the New Array icon in the Tool Bar
section and click on the down arrow and select the desired array.
Selecting an array will add the selected array to the Arrays in Project listing at the bottom of the window. You can then wth your mouse
cursor move the array and it's horizontal coverage display around the floor plan drawing and check the horizontal coverage. Position
the array by grabbing the yellow icon with your mouse cursor and moving it. Clicking on the red box which identifies the aiming point
allow you to change the aiming point.
A third method of adding an array is to right click on the floor plan graphic and then select Add Array from the pop up menu. Notice that
when you use this method, the horizontal coverage graphic is automatically inserted into the floor plan graphic. For our example, lets
add an ICLive and an ICLive DUAL to the project listing. At this point, you can jump to the Array Properties window to adjust the array's
position and aiming by clicking on Edit in the lower left corner of the window or by going to the Array Properties icon above the floor
plan graphic.
16
Advertisement
Table of Contents
