Cleaning The Monitor; Shipping The Monitor; Optimizing Picture Quality - Compaq V70 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . .
Keep the monitor in a well-ventilated area, away from excessive
light, heat, and moisture. Keep the monitor away from high
capacity transformers, electric motors, and other strong
magnetic fields.
In a two-monitor system, place the monitors as far apart from
each other as possible to lessen interference between them.
Do not open the monitor cabinet or attempt to service this
product yourself. Adjust only those controls that are covered
by the operating instructions. If the monitor is not operating
properly or has been dropped or damaged, contact your Compaq
authorized dealer, reseller, or service provider.

Cleaning the Monitor

To clean the monitor, follow these steps:
1. Turn off the monitor and the computer.
2. Dust the monitor by wiping the screen and the cabinet with
a soft, clean cloth.
If the screen requires more than dusting, use an antistatic CRT
screen cleaner.

Shipping the Monitor

To ship the monitor, follow these steps:
1. Turn off the monitor and the computer.
2. Disconnect the signal cable from the computer.
3. Disconnect the power cable from the electrical power outlet.
4. Unplug the power cable from the back of the monitor.
5. Place the monitor into its original box with its original packing
material.

Optimizing Picture Quality

The picture image will stabilize after a warm-up period of 30
minutes. Allow the monitor to warm up prior to performing the
following procedures.
3-2 Care and Maintenance
CAUTION: Do not use benzene, thinner, or any volatile
substances to clean the monitor. These chemicals may
damage the cabinet finish.