Table of Contents
Advertisement
Explanation of symbols:
icon
statement
Transfer audio files from the middle column of the PC to the right column, the
buffer of the siren.
Save audio files from siren to PC
Play audio file on PC Speaker
Pause playback
Delete audio file
Change the order of the audio files. Select a file and move it up or down with
the arrow.
Download audio files from the right column, the Siren cache, to the Siren
permanent memory.
Exit program
Adjusting the volume of the audio files
Indication of how much memory the siren is already occupied in percent.
If the value exceeds 100%, an error message appears.
Move the new audio files from left to right by selecting the files in the middle column and clicking the
double arrow icon.
5. adjust the order of the files using the up/down arrows, if necessary
The Z-Wave Gateway plays an audio file based on its order in this file list. If the order of the files is
changed, make sure to update the Z-Wave Gateway according to the order.
Hint:
The second file in the sequence is also used by the siren sabotage switch. If the sabotage
switch is activated, the file is always played at this point.
When the files are ready to download, click the Download Device icon. To do this, first select one of
the files in the third column on the far right so that the icon is displayed correctly and the download can
be started.
When the download is complete, click the Exit Program icon to close the software and disconnect the
USB cable.
8. restart the siren by removing one of its batteries and reinserting it. This is the only way to initialize
the new audio files.
13
English
Advertisement
Table of Contents
