Table of Contents
Advertisement
English
Load audio files to siren
A PC with Microsoft Windows operating system and a mini USB cable is required. Make sure that the
batteries are inserted in the speech siren as well, otherwise the download will not work.
1. connect the siren to the USB port of the PC using the mini-USB cable
Windows asks you if you want to run the software. Allow and continue. If no pop-up appears, start the
application "Door Bell" on the USB drive.
3. the following screen appears:
The two columns on the left show the PC folders and the audio files in a selected folder.
The column on the right is a temporary memory that displays the list of files that are ready to be
loaded onto the siren. When the device is connected for the first time, this section is filled with files that
are currently in the siren memory.
The siren is supplied with factory preset sounds. These audio files can be used as a reference when
the volume of the audio file is adjusted to the unit's speaker.
12
Advertisement
Table of Contents
